New SAC from Morton's?

[Matt St. John]

I just need the plates with the hole cut for the spike. Other than that I can drill where I need to drill and get the hardware myself. So sign me up for 2 identical raw metal plates.

[RoadStarRaider]

[jhow2133]

I just need the plates with the hole cut for the spike. Other than that I can drill where I need to drill and get the hardware myself. So sign me up for 2 identical raw metal plates.

The big center hole and none of the others correct?

[Matt St. John]

Yup. That's it.

[jhow2133]

M12x1.25 x 110mm zinc grade 10.9 is about impossible to find. I contacted 7 different suppliers today in an attempt to source them. May end up getting non coated and then paint so it won't drip rust on my shine. 

Matt, I am having my buddy run your non drilled plates with my test plate. Should fit in a flat rate box. 

[Matt St. John]

Dude that's badass. Thanks. I really appreciate it.

[Jeremy]

Getting anywhere on these plates?  Just curious!  Was you able to come up with a price?

Sent from my DROID RAZR using Tapatalk 2

[jhow2133]

I went out on a limb and ordered  (assuming they would work) grade 10.9 bolts in the lengths I wanted. I need to paint the long ones in zinc paint because I can't get them in anything other than black oxide.  My buddy is waiting for some free time in the cnc and I told him to run 7 in all.  He has the material and program just has to get time in the shop.  Still happening brothers.  I am swamped at work so I can't push as much as I want but it will happen.  You still have dimensions etc if you want to get it done otherwise.  I will take care of everyone I can.

[Deyv]

I went out on a limb and ordered  (assuming they would work) grade 10.9 bolts in the lengths I wanted. I need to paint the long ones in zinc paint because I can't get them in anything other than black oxide.  My buddy is waiting for some free time in the cnc and I told him to run 7 in all.  He has the material and program just has to get time in the shop.  Still happening brothers.  I am swamped at work so I can't push as much as I want but it will happen.  You still have dimensions etc if you want to get it done otherwise.  I will take care of everyone I can.

Verrry nice.. I'm sure we all understand busy....Just let us know when it can happen, It's certainly appreciated..

[jhow2133]

Bolts are here. Yellow zinc are 90mm the black are 110mm. 

The second pic is the stock bolt, new rear bolt with spacer (unpainted primer, going to shoot black today), new front bolt. 

[Jeremy]

Bolts are here. Yellow zinc are 90mm the black are 110mm. 

The second pic is the stock bolt, new rear bolt with spacer (unpainted primer, going to shoot black today), new front bolt.

Josh, let me know if any $ in advance will help!  Id be happy to send you some

Sent from my DROID RAZR using Tapatalk 2

[jhow2133]

No worries man. $$$ isn't the problem just time.

[jhow2133]

My buddy sent me this today in regards to the plates:
Here is a picture of 2 of them
 

[Deyv]

Looks a little.... "thick"...

[Scoob]

 

[jhow2133]

1/2" plate. Majority will be milled down to 1/4" but where the spike mounts will still be 1/2"