Killer looking Custom in V-Twin magazine...

[LostDog]

That things awesome!

I may be a little biased, but it seems ta me that any bike can be made to look great but wouldn't it be that much better with the Raider as the canvas?

[Scoob]

Like it

[Ares X]

That things awesome!

I may be a little biased, but it seems ta me that any bike can be made to look great but wouldn't it be that much better with the Raider as the canvas?

I agree.  Considering the Vulcan doesn't have near the rake to start with, the Raider would just be partially there. I saw a Roadstar at a local bike event and basically everything the guy did to it were things the Raider started out with. I was thinking "Just think how much money you could've saved had you started with the Raider".

I'm not a fan of most stock HDs, but I've seen some absolutely gorgeous custom ones.

[PhysicsDude55]

You can see what looks like a dog bone and shock in the photo probably has air ride.

You are right, if I look at the frame, I can see that.
But, I cannot understand where is the rear wheel travel.

I see what you mean, looks like the rear fender doesn't have any travel left.  He probably let all the air out and lowered it to the max for the photo shoot.

I used to own a Vulcan 800, which is what that bike is I'm pretty sure, might be a 900, can't tell, too many custom parts!  They actually have a lot of rake.  Not as much as a Raider, but not too far off.  The engine isn't nearly as powerful, but they're still pretty quick since they weight almost 200 lbs less.

Very nice looking bike.  The front end looks amazing.

[zakattak]

I actually know that guy (Andres) and hes made me a couple things for the bagger build Im doing.  He actually did that build a while back.  It turned out awesome!  We were talking the other day and hes going to be working on a Raider next.  Stay tuned cause it will make the magazines again!  His brother owns Tricky Air which is Arnie.  Pretty nice guy.

Who is that guy? i want to know who made his exhaust...really want to know who made/designed that exhaust...

[Crashrd]

Hey Ares,  Looking all through the web and can't find the pic. It won't show on the site. Can ya point me in the right direction?

[Ares X]

Hey Ares,  Looking all through the web and can't find the pic. It won't show on the site. Can ya point me in the right direction?

Apparently they swap their pictures out with each new issue and use the same names for the pics. The ones showing on the first page are not the correct one and I can no longer find it on their site now that they're showing the December issue.

Sorry.

[Crashrd]

Think I finally found it after you gave me the  November issue clue (I shoulda been able to figure that out but ...duh).  I think this is the critter and if not it's a bad bike still.

[RuneRaider]

Hey Ares,  Looking all through the web and can't find the pic. It won't show on the site. Can ya point me in the right direction?

Apparently they swap their pictures out with each new issue and use the same names for the pics. The ones showing on the first page are not the correct one and I can no longer find it on their site now that they're showing the December issue.

Sorry.

That explains it. I was wondering how the photos got swapped out.

[strike 3]

I actually know that guy (Andres) and hes made me a couple things for the bagger build Im doing.  He actually did that build a while back.  It turned out awesome!  We were talking the other day and hes going to be working on a Raider next.  Stay tuned cause it will make the magazines again!  His brother owns Tricky Air which is Arnie.  Pretty nice guy.

Who is that guy? i want to know who made his exhaust...really want to know who made/designed that exhaust...

Well the bike exhaust was a one off design, from Andres and I think another guy.  Cant remember the exact details that he told me. 

[Ares X]

Think I finally found it after you gave me the  November issue clue (I shoulda been able to figure that out but ...duh).  I think this is the critter and if not it's a bad bike still.

That's the one!

[zakattak]

So this is the reason i was so intrigued by this exhaust....iv'e been cutting and working on this for about a month and then i saw that picture on the thread...

[Ares X]

Nice! Is yours all custom?

[zakattak]

Nice! Is yours all custom?

i sold my cobra swepts and bought a set of hard krome velocity lights black, started cutting and shaping and bending and cutting and now its sanding and sanding and sanding lol i wanted to chrome the tip and have a chrome underneath both of the seperations in the headers heat shields..paint the heat shields black buuuuuut then i saw that v-twin mag picture 

[Ares X]

Nice! Is yours all custom?

i sold my cobra swepts and bought a set of hard krome velocity lights black, started cutting and shaping and bending and cutting and now its sanding and sanding and sanding lol i wanted to chrome the tip and have a chrome underneath both of the seperations in the headers heat shields..paint the heat shields black buuuuuut then i saw that v-twin mag picture 

So it's somewhat similar to one other bike. That's not so bad.  It'll still look sharp.