Big Air kits which one ?

[Sweet Tooth]

Theirs dejbalu110s Tbrains or another one its getting close to the end of the year and time to do some mods. Thinking of prob using the Diy Dejablu big air kit . Whats your thoughts ? I dont see the Tbrain one doing much because of it still usin the stock air box
Dejablus110 https://www.roadstarraider.com/index.php?topic=3171.0
Tbrain https://www.roadstarraider.com/index.php?topic=17211.msg334893#msg334893

[RoadStarRaider]

[Paladin]

Until I see some before and after Dyno results, I'll take Tbrains HP & TQ claims with a large grain of salt. Also, I wouldn't want to have to keep replacing filters when using Dejabblue's kit.

When my Raider was normally asperated, I used a PR BAK, with LA Chopper pipes, and a PC5, which on the Dyno, showed a noticable increase in HP & TQ. I don't think there is any noticable difference between the PR BAK and the Barons BAK. As far as pipes are concerned, get what you like. For fuel management, I run a PC5, but the improved version of the PowerPro seems to work just fine. 

[Capt_Zoom]

WIth the baron's kit you'll get the throttle body extensions and the modded filter.  Jon Baron spend a lot of time flow testing them to get the most out of it...I think it was his last major project before selling the company to Chucky.  I posted pics at some point but there is a small plastic/resin cone inside the filter that's supposed to help the air funnel through the throttle body extension.  I want to say Jon tested something like 20-30 variations before settling on this one.  I'm very happy with it.

[jhow2133]

I have the Barons kit and like it but then again haven't tried anything else

[wolfraider]

I have a PR BAK and like what it did for low end torque.

[michael t]

I have Tbrains  and I like it every thing remains in place  and only takes a few min to install . If you have a K&N might help even more. 

[CHROMINATOR]

I have the Baron's BAK, have not tried any others so nothing to compare it with.

[Sweet Tooth]

I have the Baron's BAK, have not tried any others so nothing to compare it with.

Bill . Do you have to get a place for oil to spit up ? Or did you have Tejas do it ?

[CHROMINATOR]

I have the Baron's BAK, have not tried any others so nothing to compare it with.

Bill . Do you have to get a place for oil to spit up ? Or did you have Tejas do it ?

Tejas placed a oil breather tube on and ran it just under the seat on the right side, I don't like it there, I purchased a puke can and it will be located on left side front frame just under the tank.  I do not want oil mist all over my chrome so I don't like the idea of running the line to the bottom of the bike and letting it drip.  Where Tejas put it it would not have dripped because of the filter they put on but it looked so out of place to me and others here that noticed it from the pics.  I will post up pics when I get the bike back and get the can on.