Raider Patches

Author Topic: Gas gage issue  (Read 1624 times)

seventhLetter

  • Raider
  • *****
  • *
  • Join Date: Nov 2009
  • Posts: 2458
  • Location: TN
  • Referrals: 1
    • View Profile
Re: Gas gage issue
« Reply #30 on: Jan 04, 2013, 11:22:45 AM »
Are these first versions the ones that are going out on everyone's Raiders?  If so, this sounds like something Yamaha should be covering the cost of.

My thoughts exactly Ares X!

I'll just be sure to use the newer number (01) when I order.
RoxieRaider, SeventhLetter, G, "hey you", I answer to just about anything.


Ares X

  • Global Moderator
  • Raider
  • *****
  • *
  • *
  • Join Date: Dec 2009
  • Posts: 17291
  • Location: Chandler, AZ
  • Referrals: 3
    • View Profile
Re: Gas gage issue
« Reply #31 on: Jan 04, 2013, 11:30:03 AM »
Are these first versions the ones that are going out on everyone's Raiders?  If so, this sounds like something Yamaha should be covering the cost of.

My thoughts exactly Ares X!

I'll just be sure to use the newer number (01) when I order.

You may want to call Yamaha and see what they have to say.  Tell them yours went out and you noticed there are two different part numbers. If they say the second is a replacement because the first is faulty and they improved it, then ask why it's not a recall.  I had great luck when I called them about the fuel pump.  You never know what could happen. Worse case... you're out about 15-20 minutes on a phone call.

TRaider_John

  • Patriot Guard Rider and SEA-ROAR member
  • Global Moderator
  • Raider
  • *****
  • *
  • *
  • *
  • *
  • *
  • Join Date: May 2009
  • Posts: 8605
  • Location: Charlotte, NC area
  • Referrals: 4
    • View Profile
Re: Gas gage issue
« Reply #32 on: Jan 04, 2013, 12:12:02 PM »
http://www.roadstarraider.com/docs/ypnaeg.pdf tells ya what the numbers mean.  The 01 means there is a design change, but that could be anything.

Ares X

  • Global Moderator
  • Raider
  • *****
  • *
  • *
  • Join Date: Dec 2009
  • Posts: 17291
  • Location: Chandler, AZ
  • Referrals: 3
    • View Profile
Re: Gas gage issue
« Reply #33 on: Jan 04, 2013, 12:22:40 PM »
http://www.roadstarraider.com/docs/ypnaeg.pdf tells ya what the numbers mean.  The 01 means there is a design change, but that could be anything.

Design 1: Possible fail feature

Design 2: No fail feature