What did you do to your Raider today................

[Zxdave]

Killed some snakes.

Better get some more before SERR if you keep that up !

[RoadStarRaider]

[dukedomain]

Killed some snakes.

Better get some more before SERR if you keep that up !

Dats right!

[Ares X]

Yesterday afternoon I installed the reflashed ECU, updated my PCV map and then took off riding. Put over 60 miles on. Not a ton, but needed to get home since Desiree would be getting home soon.

[CHROMINATOR]

Yesterday afternoon I installed the reflashed ECU, updated my PCV map and then took off riding. Put over 60 miles on. Not a ton, but needed to get home since Desiree would be getting home soon.

Well what did you think about it?

[Ares X]

Yesterday afternoon I installed the reflashed ECU, updated my PCV map and then took off riding. Put over 60 miles on. Not a ton, but needed to get home since Desiree would be getting home soon.

Well what did you think about it?

I reviewed in the Ivan thread.

[CHROMINATOR]

Yesterday afternoon I installed the reflashed ECU, updated my PCV map and then took off riding. Put over 60 miles on. Not a ton, but needed to get home since Desiree would be getting home soon.

Well what did you think about it?

I reviewed in the Ivan thread.

Fair enough, I guess I can search through the multitude of Ivan threads to find it... 

[Ares X]

Changed brake pads again because the cheap ass ones I put on there were squealing like crazy, so I ended up buying OEM pads for both wheels. Last time I changed the pads I screwed up when compressing the pistons and one of them cocked at an angle and all my fluid ran out. This time I had all three pads changed in about 20 minutes. That's the way it's supposed to go.  I was just much more cautious compressing the pistons.   The old pads still had a lot of life left, but they're now in the trash.

[Flipper]

I pulled the rear wheel off, taking it tomorrow to get balanced.  I developed a vibration above 70mph so think I spun a wheel weight off.

Will know tomorrow afternoon when I get to ride it.


Still need to change the PCV map to zero below 20% throttle as well.


Flipper

[the urban legend]

I pulled the rear wheel off, taking it tomorrow to get balanced.  I developed a vibration above 70mph so think I spun a wheel weight off.

Will know tomorrow afternoon when I get to ride it.


Still need to change the PCV map to zero below 20% throttle as well.


Flipper

20 oz of Ride-on
Problem solved

[Ares X]

I pulled the rear wheel off, taking it tomorrow to get balanced.  I developed a vibration above 70mph so think I spun a wheel weight off.

Will know tomorrow afternoon when I get to ride it.


Still need to change the PCV map to zero below 20% throttle as well.


Flipper

20 oz of Ride-on
Problem solved

Definitely

[Clayton]

Changed brake pads again because the cheap ass ones I put on there were squealing like crazy, so I ended up buying OEM pads for both wheels. Last time I changed the pads I screwed up when compressing the pistons and one of them cocked at an angle and all my fluid ran out. This time I had all three pads changed in about 20 minutes. That's the way it's supposed to go.  I was just much more cautious compressing the pistons.   The old pads still had a lot of life left, but they're now in the trash.

I use the old pad and a c clamp to compress the pistons back in

[Ares X]

Changed brake pads again because the cheap ass ones I put on there were squealing like crazy, so I ended up buying OEM pads for both wheels. Last time I changed the pads I screwed up when compressing the pistons and one of them cocked at an angle and all my fluid ran out. This time I had all three pads changed in about 20 minutes. That's the way it's supposed to go.  I was just much more cautious compressing the pistons.   The old pads still had a lot of life left, but they're now in the trash.

I use the old pad and a c clamp to compress the pistons back in

I did the C-clamp with a small piece of wood that was thinner than the pad.  I actually put that piece of wood next to my toolbox so I have it next time.  The pads I was removing had too much pad on them to be able to use them. I needed something smaller.

[RangerRick]

After 6 years my old Yamaha Passing Lamps and Mount's looked like crap, so installed the new ones I had for over a year or more.

I'm not impressed with the quality of the chrome on Yamaha stuff

[Ares X]

After 6 years my old Yamaha Passing Lamps and Mount's looked like crap, so installed the new ones I had for over a year or more.

I'm not impressed with the quality of the chrome on Yamaha stuff

Chrome on the bike seems good.  Chrome on the accessories can be hit or miss.

[Flipper]

Had the rear tire balanced and put it back on and aligned.  Put the rear fender rack on also.

If I had some time I would go ride for awhile.

Flipper