Author Topic: What did you do to your Raider today................  (Read 706926 times)

dreadly

  • living the dream
  • Global Moderator
  • Raider
  • *****
  • *
  • *
  • Join Date: Aug 2009
  • Posts: 13688
  • Referrals: 1
Re: What did you do to your Raider today................
« Reply #10650 on: May 16, 2017, 07:56:17 PM »
I updated my PCV map to a zero map ... I"m not tired but still need a  :pint:

RoadStarRaider

  • Advertisement
  • ***

    dukedomain

    • SEA-ROAR
    • Raider
    • *****
    • Join Date: Oct 2013
    • Posts: 3729
    • Referrals: 0
    Re: What did you do to your Raider today................
    « Reply #10651 on: May 16, 2017, 09:38:43 PM »
    Killed some snakes.

    Zxdave

    • SEA-ROAR
    • Raider
    • *****
    • Join Date: Sep 2014
    • Posts: 5576
    • Referrals: 0
    Re: What did you do to your Raider today................
    « Reply #10652 on: May 17, 2017, 07:16:43 AM »
    Killed some snakes.
    Better get some more before SERR if you keep that up !
    Lean till it grinds , then lean some more ..

    • Advertisement

      dukedomain

      • SEA-ROAR
      • Raider
      • *****
      • Join Date: Oct 2013
      • Posts: 3729
      • Referrals: 0
      Re: What did you do to your Raider today................
      « Reply #10653 on: May 17, 2017, 10:15:22 AM »
      Killed some snakes.
      Better get some more before SERR if you keep that up !
      Dats right!

      Ares X

      • Administrator
      • Raider
      • *****
      • *
      • *
      • *
      • Join Date: Dec 2009
      • Posts: 28419
      • Referrals: 7
      Re: What did you do to your Raider today................
      « Reply #10654 on: May 17, 2017, 11:47:56 AM »
      Yesterday afternoon I installed the reflashed ECU, updated my PCV map and then took off riding. Put over 60 miles on. Not a ton, but needed to get home since Desiree would be getting home soon.

      CHROMINATOR

      • MSgt USMC Retired - Patriot Guard Rider
      • SEA-ROAR
      • Raider
      • *****
      • *
      • *
      • Join Date: Sep 2011
      • Posts: 40178
      • Referrals: 6
      Re: What did you do to your Raider today................
      « Reply #10655 on: May 17, 2017, 12:44:12 PM »
      Yesterday afternoon I installed the reflashed ECU, updated my PCV map and then took off riding. Put over 60 miles on. Not a ton, but needed to get home since Desiree would be getting home soon.

      Well what did you think about it?

      Ares X

      • Administrator
      • Raider
      • *****
      • *
      • *
      • *
      • Join Date: Dec 2009
      • Posts: 28419
      • Referrals: 7
      Re: What did you do to your Raider today................
      « Reply #10656 on: May 17, 2017, 02:06:57 PM »
      Yesterday afternoon I installed the reflashed ECU, updated my PCV map and then took off riding. Put over 60 miles on. Not a ton, but needed to get home since Desiree would be getting home soon.

      Well what did you think about it?

      I reviewed in the Ivan thread.

      CHROMINATOR

      • MSgt USMC Retired - Patriot Guard Rider
      • SEA-ROAR
      • Raider
      • *****
      • *
      • *
      • Join Date: Sep 2011
      • Posts: 40178
      • Referrals: 6
      Re: What did you do to your Raider today................
      « Reply #10657 on: May 17, 2017, 02:54:24 PM »
      Yesterday afternoon I installed the reflashed ECU, updated my PCV map and then took off riding. Put over 60 miles on. Not a ton, but needed to get home since Desiree would be getting home soon.

      Well what did you think about it?

      I reviewed in the Ivan thread.

      Fair enough, I guess I can search through the multitude of Ivan threads to find it...  :rotfl: :rotfl: :rotfl:

      Ares X

      • Administrator
      • Raider
      • *****
      • *
      • *
      • *
      • Join Date: Dec 2009
      • Posts: 28419
      • Referrals: 7
      Re: What did you do to your Raider today................
      « Reply #10658 on: May 21, 2017, 03:29:03 PM »
      Changed brake pads again because the cheap ass ones I put on there were squealing like crazy, so I ended up buying OEM pads for both wheels. Last time I changed the pads I screwed up when compressing the pistons and one of them cocked at an angle and all my fluid ran out. This time I had all three pads changed in about 20 minutes. That's the way it's supposed to go.  I was just much more cautious compressing the pistons.   The old pads still had a lot of life left, but they're now in the trash.

      Flipper

      • SEA-ROAR Member
      • Warrior
      • ****
      • Join Date: Oct 2009
      • Posts: 1752
      • Referrals: 0
        • JW Publishing Corp
      Re: What did you do to your Raider today................
      « Reply #10659 on: May 21, 2017, 06:16:01 PM »
      I pulled the rear wheel off, taking it tomorrow to get balanced.  I developed a vibration above 70mph so think I spun a wheel weight off.

      Will know tomorrow afternoon when I get to ride it.


      Still need to change the PCV map to zero below 20% throttle as well.


      Flipper
      Stealth Bike

      Simplicity and Logic do not fit in Government Work!

      the urban legend

      • Raider
      • *****
      • Join Date: Sep 2011
      • Posts: 2728
      • Referrals: 0
      Re: What did you do to your Raider today................
      « Reply #10660 on: May 21, 2017, 06:18:07 PM »
      I pulled the rear wheel off, taking it tomorrow to get balanced.  I developed a vibration above 70mph so think I spun a wheel weight off.

      Will know tomorrow afternoon when I get to ride it.


      Still need to change the PCV map to zero below 20% throttle as well.


      Flipper

      20 oz of Ride-on
      Problem solved
      I'd rather die on a motorcycle than live without one.

      ,,

      Ares X

      • Administrator
      • Raider
      • *****
      • *
      • *
      • *
      • Join Date: Dec 2009
      • Posts: 28419
      • Referrals: 7
      Re: What did you do to your Raider today................
      « Reply #10661 on: May 21, 2017, 07:28:03 PM »
      I pulled the rear wheel off, taking it tomorrow to get balanced.  I developed a vibration above 70mph so think I spun a wheel weight off.

      Will know tomorrow afternoon when I get to ride it.


      Still need to change the PCV map to zero below 20% throttle as well.


      Flipper

      20 oz of Ride-on
      Problem solved

      Definitely

      Clayton

      • Mmm...🍺 Beer
      • Raider
      • *****
      • *
      • Join Date: Nov 2011
      • Posts: 6018
      • Referrals: 2
      Re: What did you do to your Raider today................
      « Reply #10662 on: May 21, 2017, 09:25:37 PM »
      Changed brake pads again because the cheap ass ones I put on there were squealing like crazy, so I ended up buying OEM pads for both wheels. Last time I changed the pads I screwed up when compressing the pistons and one of them cocked at an angle and all my fluid ran out. This time I had all three pads changed in about 20 minutes. That's the way it's supposed to go.  I was just much more cautious compressing the pistons.   The old pads still had a lot of life left, but they're now in the trash.
      I use the old pad and a c clamp to compress the pistons back in

      Ares X

      • Administrator
      • Raider
      • *****
      • *
      • *
      • *
      • Join Date: Dec 2009
      • Posts: 28419
      • Referrals: 7
      Re: What did you do to your Raider today................
      « Reply #10663 on: May 22, 2017, 10:04:41 AM »
      Changed brake pads again because the cheap ass ones I put on there were squealing like crazy, so I ended up buying OEM pads for both wheels. Last time I changed the pads I screwed up when compressing the pistons and one of them cocked at an angle and all my fluid ran out. This time I had all three pads changed in about 20 minutes. That's the way it's supposed to go.  I was just much more cautious compressing the pistons.   The old pads still had a lot of life left, but they're now in the trash.
      I use the old pad and a c clamp to compress the pistons back in

      I did the C-clamp with a small piece of wood that was thinner than the pad.  I actually put that piece of wood next to my toolbox so I have it next time.  The pads I was removing had too much pad on them to be able to use them. I needed something smaller.

      RangerRick

      • Raider
      • *****
      • *
      • *
      • Join Date: Apr 2010
      • Posts: 5231
      • Referrals: 1
      Re: What did you do to your Raider today................
      « Reply #10664 on: May 22, 2017, 10:46:30 AM »
      After 6 years my old Yamaha Passing Lamps and Mount's looked like crap, so installed the new ones I had for over a year or more.

      I'm not impressed with the quality of the chrome on Yamaha stuff >:(
      2009 Raider XV19CYS
      ANG Member 25 years
      Retired Aug. 1, 2010