What do you do to your Raider today................

[theurbanlegend]

Put my baby to bed for the winter...Miss her already.

[TomOD69]

Put my baby to bed for the winter...Miss her already.

Roger that. Spring can't come soon enough!

[biker42lue]

Put my baby to bed for the winter...Miss her already.

Roger that. Spring can't come soon enough!

Next you guys are going to start talking about this mythical "snow" that I keep hearing about. 

[Ares X]

Put my baby to bed for the winter...Miss her already.

Roger that. Spring can't come soon enough!

Next you guys are going to start talking about this mythical "snow" that I keep hearing about. 

Yeah, they do that every year.  I never seem to see it, so I just keep on riding.

[dreadly]

Put my baby to bed for the winter...Miss her already.

Roger that. Spring can't come soon enough!

Next you guys are going to start talking about this mythical "snow" that I keep hearing about. 

Damn all of you and your riding year round 

[biker42lue]

Put my baby to bed for the winter...Miss her already.

Roger that. Spring can't come soon enough!

Next you guys are going to start talking about this mythical "snow" that I keep hearing about. 

Damn all of you and your riding year round 

 

[TomOD69]

Put my baby to bed for the winter...Miss her already.

Roger that. Spring can't come soon enough!

Next you guys are going to start talking about this mythical "snow" that I keep hearing about. 

I really gotta move to Texas!    Woke up this morning to another couple inches of snow.
...Keeping to topic though, did install the tappet covers last night!

[Scoob]

Threaded in my 3 inch extentions and hopefully I can do some riding this weekend (its supposed to be in the 50's) and make sure I dont have any leaks before I pull the forks down.

[Ares X]

Threaded in my 3 inch extentions and hopefully I can do some riding this weekend (its supposed to be in the 50's) and make sure I dont have any leaks before I pull the forks down.

I used teflon tape and even replaced the exiting O-Ring with a slightly larger one and it did the trick.

Good luck!

[Scoob]

Threaded in my 3 inch extentions and hopefully I can do some riding this weekend (its supposed to be in the 50's) and make sure I dont have any leaks before I pull the forks down.

I used teflon tape and even replaced the exiting O-Ring with a slightly larger one and it did the trick.

Good luck!

I didnt use any tape but Im starting to wonder if I should have? Ive read posts that some that have used tape and some that didnt. How much thicker was the O-ring that you put in?

[Ares X]

Threaded in my 3 inch extentions and hopefully I can do some riding this weekend (its supposed to be in the 50's) and make sure I dont have any leaks before I pull the forks down.

I used teflon tape and even replaced the exiting O-Ring with a slightly larger one and it did the trick.

Good luck!

I didnt use any tape but Im starting to wonder if I should have? Ive read posts that some that have used tape and some that didnt. How much thicker was the O-ring that you put in?

Just slightly thicker.  I couldn't find one in metric measurements, but picked up one that was really close and compared it to the original and it was just slightly thicker.  Sorry, I don't remember the size I ended up buying.

[Scoob]

Threaded in my 3 inch extentions and hopefully I can do some riding this weekend (its supposed to be in the 50's) and make sure I dont have any leaks before I pull the forks down.

I used teflon tape and even replaced the exiting O-Ring with a slightly larger one and it did the trick.

Good luck!

I didnt use any tape but Im starting to wonder if I should have? Ive read posts that some that have used tape and some that didnt. How much thicker was the O-ring that you put in?

Just slightly thicker.  I couldn't find one in metric measurements, but picked up one that was really close and compared it to the original and it was just slightly thicker.  Sorry, I don't remember the size I ended up buying.

No problem-I will see if they leak before I do anything, no big deal to thread them back off and put tape and bigger o-ring in since I havent lowered the forks yet.

[kreed020]

Finally installed my Kurykan Sub Fender and license plate frame.   A lot of work but got it done.
 
Also installed my RAIDER shifter from Custom Rider. Looks clean.


Hard to see but here's a couple of pix.

[Mr. T]

Finally installed my Kurykan Sub Fender and license plate frame.   A lot of work but got it done.
 
Also installed my RAIDER shifter from Custom Rider. Looks clean.

Gotcha... 

 

[biker42lue]

Got my first set of LEDs put on Friday night. Not as hard as I had thought. The hardest part was figuring out where to secure with zipties. The ones that come with the Custom Dynamics kit seem to be meant to secure wires to other wires or hoses; not big enough to wrap around the frame at all.

But it's done, and I'm happy and now I want more.