Raider Categories => Technical Discussion => Topic started by: TMan05 on Aug 22, 2021, 10:05:44 am
Title: Passenger foot pegs
Post by: TMan05 on Aug 22, 2021, 10:05:44 am
Hey everyone.. Still trying to sort out this box o stuff from my newly purchased Raider and the previous owner has it set up for a single rider. These are the parts he gave me (pic below) but from what I can tell, it seems to be missing a bracket to connect the peg to one of the sides. I have zilch for hardware other than the two bolts on each side of the bike placed there. What else am I missing and have you found anywhere to get oem parts? Any help would be greatly appreciated!
Title: Re: Passenger foot pegs
Post by: Fiddles on Aug 22, 2021, 01:51:55 pm
Hey everyone.. Still trying to sort out this box o stuff from my newly purchased Raider and the previous owner has it set up for a single rider. These are the parts he gave me (pic below) but from what I can tell, it seems to be missing a bracket to connect the peg to one of the sides. I have zilch for hardware other than the two bolts on each side of the bike placed there. What else am I missing and have you found anywhere to get oem parts? Any help would be greatly appreciated!
you have the exhaust side passenger peg mount but the pegs are for the front driver
Title: Re: Passenger foot pegs
Post by: TMan05 on Aug 22, 2021, 01:58:40 pm
Well 💩
Title: Re: Passenger foot pegs
Post by: ROADKILL on Aug 22, 2021, 08:03:52 pm
Hey everyone.. Still trying to sort out this box o stuff from my newly purchased Raider and the previous owner has it set up for a single rider. These are the parts he gave me (pic below) but from what I can tell, it seems to be missing a bracket to connect the peg to one of the sides. I have zilch for hardware other than the two bolts on each side of the bike placed there. What else am I missing and have you found anywhere to get oem parts? Any help would be greatly appreciated!
you have the exhaust side passenger peg mount but the pegs are for the front driver
If not mistaken the previous owner used the passenger pegs for the rider - looking at pictures he posted before.
Title: Re: Passenger foot pegs
Post by: TMan05 on Aug 22, 2021, 08:24:16 pm
Hey everyone.. Still trying to sort out this box o stuff from my newly purchased Raider and the previous owner has it set up for a single rider. These are the parts he gave me (pic below) but from what I can tell, it seems to be missing a bracket to connect the peg to one of the sides. I have zilch for hardware other than the two bolts on each side of the bike placed there. What else am I missing and have you found anywhere to get oem parts? Any help would be greatly appreciated!
you have the exhaust side passenger peg mount but the pegs are for the front driver
Whoa! Really?! Could you share the post? If not mistaken the previous owner used the passenger pegs for the rider - looking at pictures he posted before.
Title: Re: Passenger foot pegs
Post by: ROADKILL on Aug 22, 2021, 08:43:12 pm
Hey everyone.. Still trying to sort out this box o stuff from my newly purchased Raider and the previous owner has it set up for a single rider. These are the parts he gave me (pic below) but from what I can tell, it seems to be missing a bracket to connect the peg to one of the sides. I have zilch for hardware other than the two bolts on each side of the bike placed there. What else am I missing and have you found anywhere to get oem parts? Any help would be greatly appreciated!
you have the exhaust side passenger peg mount but the pegs are for the front driver
Whoa! Really?! Could you share the post? If not mistaken the previous owner used the passenger pegs for the rider - looking at pictures he posted before.
It was your post about the foot pegs - your front pegs are actually the passenger pegs - the pegs in the box are the original front pegs.
Title: Re: Passenger foot pegs
Post by: TMan05 on Aug 22, 2021, 09:01:14 pm
Hey everyone.. Still trying to sort out this box o stuff from my newly purchased Raider and the previous owner has it set up for a single rider. These are the parts he gave me (pic below) but from what I can tell, it seems to be missing a bracket to connect the peg to one of the sides. I have zilch for hardware other than the two bolts on each side of the bike placed there. What else am I missing and have you found anywhere to get oem parts? Any help would be greatly appreciated!
you have the exhaust side passenger peg mount but the pegs are for the front driver
Whoa! Really?! Could you share the post? If not mistaken the previous owner used the passenger pegs for the rider - looking at pictures he posted before.
It was your post about the foot pegs - your front pegs are actually the passenger pegs - the pegs in the box are the original front pegs.
Oh sorry.. I completely misunderstood you. I thought you meant the previous owner was on this forum and posted pictures with the pegs mounted LoL. I need to find a way to make this work. Maybe machining a new peg mount for the other side could work.. have to look into it more
Title: Re: Passenger foot pegs
Post by: 2012CVKNebulasRaider on Aug 23, 2021, 10:12:24 am
Here is the best I can do for an visual illustration.
Title: Re: Passenger foot pegs
Post by: 2012CVKNebulasRaider on Aug 23, 2021, 10:18:55 am
Oops! I made a slight mistake on the passenger foot peg brackets. Swap the rear passenger peg brackets. The pic I marked the right side is the left side & vice versa. Sorry!
Title: Re: Passenger foot pegs
Post by: TMan05 on Aug 23, 2021, 08:45:16 pm
Thank you so much for the breakdown. The exhaust side looks like it needs an additional bracket? Is there a way you could take a couple pics so I can see what needs to be there?
Title: Re: Passenger foot pegs
Post by: ROADKILL on Aug 23, 2021, 08:50:14 pm
Thank you so much for the breakdown. The exhaust side looks like it needs an additional bracket? Is there a way you could take a couple pics so I can see what needs to be there?
That's where the heel guard goes - the piece with the chrome wire on it is the heel guard
Title: Re: Passenger foot pegs
Post by: TMan05 on Aug 23, 2021, 09:17:38 pm
Thank you so much for the breakdown. The exhaust side looks like it needs an additional bracket? Is there a way you could take a couple pics so I can see what needs to be there?
That's where the heel guard goes - the piece with the chrome wire on it is the heel guard
I guess what I meant was, there is nowhere for the actual peg to mount to like the other side has. I figured that was to protect the passenger’s shoes from melting LoL. But if you look at the left passenger peg, it has a u shape to receive the peg while the right side consists of one plane with the heel guard being the only thing sticking out from it.. I don’t know if I am making sense or not 🤷🏽♂️
Title: Re: Passenger foot pegs
Post by: the urban legend on Aug 23, 2021, 09:24:49 pm
Thank you so much for the breakdown. The exhaust side looks like it needs an additional bracket? Is there a way you could take a couple pics so I can see what needs to be there?
That's where the heel guard goes - the piece with the chrome wire on it is the heel guard
I guess what I meant was, there is nowhere for the actual peg to mount to like the other side has. I figured that was to protect the passenger’s shoes from melting LoL. But if you look at the left passenger peg, it has a u shape to receive the peg while the right side consists of one plane with the heel guard being the only thing sticking out from it.. I don’t know if I am making sense or not 🤷🏽♂️
Both pieces are for the right side. The piece with the heel guard bolts onto the peg mount.
Title: Re: Passenger foot pegs
Post by: TMan05 on Aug 23, 2021, 09:30:41 pm
Thank you so much for the breakdown. The exhaust side looks like it needs an additional bracket? Is there a way you could take a couple pics so I can see what needs to be there?
That's where the heel guard goes - the piece with the chrome wire on it is the heel guard
I guess what I meant was, there is nowhere for the actual peg to mount to like the other side has. I figured that was to protect the passenger’s shoes from melting LoL. But if you look at the left passenger peg, it has a u shape to receive the peg while the right side consists of one plane with the heel guard being the only thing sticking out from it.. I don’t know if I am making sense or not 🤷🏽♂️
Both pieces are for the right side. The piece with the heel guard bolts onto the peg mount.
Gotcha. Makes total sense now! So I need to find the left side somewhere online hopefully. Thank you for your patience! I appreciate you taking the time to go over this with me!
Title: Re: Passenger foot pegs
Post by: ROADKILL on Aug 24, 2021, 08:17:24 am
Thank you so much for the breakdown. The exhaust side looks like it needs an additional bracket? Is there a way you could take a couple pics so I can see what needs to be there?
That's where the heel guard goes - the piece with the chrome wire on it is the heel guard
I guess what I meant was, there is nowhere for the actual peg to mount to like the other side has. I figured that was to protect the passenger’s shoes from melting LoL. But if you look at the left passenger peg, it has a u shape to receive the peg while the right side consists of one plane with the heel guard being the only thing sticking out from it.. I don’t know if I am making sense or not 🤷🏽♂️
Both pieces are for the right side. The piece with the heel guard bolts onto the peg mount.
Gotcha. Makes total sense now! So I need to find the left side somewhere online hopefully. Thank you for your patience! I appreciate you taking the time to go over this with me!
Also as a reminder the pegs that are on the bike right now are the passenger pegs in the riders position - the pegs in the box are actually the riders pegs