Author Topic: Stock baffle removal  (Read 351 times)

BonesJustice

  • V Star
  • *
  • Join Date: Jul 2017
  • Posts: 30
  • Referrals: 0
Stock baffle removal
« on: Nov 26, 2020, 07:05:08 pm »
Any tricks to taking out the stock baffles? The top one came out pretty easy. Used the 3-7/8 hole saw and went in as far as I could. Used some vice grips to spin and pull out the baffle. Bottom one doesn’t want to come out. I can get it to spin 360 and slide forward and backwards an inch or 2 but gets stuck on a lip or the 2nd weld that gets cut.

RoadStarRaider

  • Advertisement
  • ***

    Fiddles

    • SEA-ROAR
    • Raider
    • *****
    • Join Date: Dec 2011
    • Posts: 13560
    • Referrals: 1
    Re: Stock baffle removal
    « Reply #1 on: Nov 26, 2020, 08:09:49 pm »
    Slide hammer with a hook
    V&H 2into1, Bullet cowl, Full Wrap front Fender, Ultimate  seat, Barons Tach, lowering bones and progressive spring, Ivan's flash, K&N filter with open air box, Avon Cobra Chrome  tires

    House O Pain

    • V Star
    • *
    • Join Date: May 2020
    • Posts: 20
    • Referrals: 0
    Re: Stock baffle removal
    « Reply #2 on: Dec 13, 2020, 04:41:43 pm »
    You could try to file down that 'lip' that is stopping the removal.  Using a dremel tool to grind it flat would be ideal.

    "A man's got to know his limitations"  Clint Eastwood as Dirty Harry