Author Topic: Onboard diagnostic  (Read 44770 times)

fake

  • Guest
Onboard diagnostic
« on: May 13, 2010, 07:53:13 am »
Ya, I know.  I've been full of questions lately.  You Warrior guys will know what I'm talking about...

Ok, on the Warrior if you turn your kill switch off, turn the bike on while holding down the select & reset button; the Warrior will display an on-board diagnostic screen.  It will tell you EVERYTHING, right down to your oil temp and engine temp.

Now, I have tried this with the Raider and have got it to say "diag" on the display.  After that, I can't get it to cycle through the diagnostic mode.  Is there something I am missing?  I know it can be done because it starts out exactly like the warrior, but when the word "diag" come up; I can't get it to cycle through.

RoadStarRaider

  • Advertisement
  • ***

    seventhLetter

    • Raider
    • *****
    • *
    • Join Date: Nov 2009
    • Posts: 2608
    • Referrals: 1
    Re: Onboard diagnostic
    « Reply #1 on: May 13, 2010, 08:12:06 am »
    just use the button on the left handle and the button below the speedo to cycle through things.  Should work fine. 
    RoxieRaider, SeventhLetter, G, "hey you", I answer to just about anything.

    fake

    • Guest
    Re: Onboard diagnostic
    « Reply #2 on: May 13, 2010, 08:26:56 am »
    just use the button on the left handle and the button below the speedo to cycle through things.  Should work fine. 

    Do you press them simultaneously?  Once it is displaying the word "diag", none of my buttons will cycle through the diagnostic mode.  I'm wanting to see what my engine temp is.

    • Advertisement

      seventhLetter

      • Raider
      • *****
      • *
      • Join Date: Nov 2009
      • Posts: 2608
      • Referrals: 1
      Re: Onboard diagnostic
      « Reply #3 on: May 13, 2010, 08:33:27 am »
      hmmmm...sorry fake I'm not on my bike today.  I just remember it was intuitive I didn't really have to think about it.

      There was a thread on here somewhere...I think it was the March or April giveaway about what we learned in the owner's manual.  Someone posted info about the diagnostics...
      RoxieRaider, SeventhLetter, G, "hey you", I answer to just about anything.

      seventhLetter

      • Raider
      • *****
      • *
      • Join Date: Nov 2009
      • Posts: 2608
      • Referrals: 1
      Re: Onboard diagnostic
      « Reply #4 on: May 13, 2010, 08:37:54 am »
      Here's info from that thread:

      1. Turn bike off
      2. While holding the Reset switch, turn the bike on, and continue to hold the switch for approximately 5 seconds until "diag" appears on the clock display.
      3. Keep holding the Reset switch and hold the Select switch together for approximately 5 seconds until numbers appear.
      4. Scroll left or right until the function number 11 comes up, which will display the temperature. Mine is in farenheight.

      RoxieRaider, SeventhLetter, G, "hey you", I answer to just about anything.

      Metric

      • Roadliner
      • ***
      • *
      • *
      • Join Date: Sep 2009
      • Posts: 950
      • Referrals: 0
      Re: Onboard diagnostic
      « Reply #5 on: May 13, 2010, 10:47:26 pm »
      Thank you roxieRaider
      SEMPER FI  " welcome home" combat vets

      life begins @200MPH

      • Guest
      Re: Onboard diagnostic
      « Reply #6 on: Jul 22, 2010, 06:27:52 pm »
      what is normal running temp?

      fake

      • Guest
      Re: Onboard diagnostic
      « Reply #7 on: Jul 22, 2010, 08:10:35 pm »
      what is normal running temp?

      I went for a ride last Saturday.  After 40 miles or so, I pulled over to check.  It was showing 241 degrees.
      On the way back home, it was hot as hell, and I read 256 degrees.

      jkskeet

      • Warrior
      • ****
      • *
      • Join Date: May 2010
      • Posts: 1369
      • Referrals: 0
      Re: Onboard diagnostic
      « Reply #8 on: Jul 23, 2010, 07:22:22 am »
      I'll have to check mine just because you got me curious now...

      Your buddy may not be impressed cuz he thinks a bike has to vibrate you to death and rumble like a worn out washing machine.But the Raider does the job in a more fashionable way. Like a Lexus vs. a Volkswagon

      shortysboy09

      • Guest
      Re: Onboard diagnostic
      « Reply #9 on: Jul 23, 2010, 08:03:44 am »
      Too cool, Does anyone have a legend breaking down what each number means?

      jacknife

      • SEA-ROAR Member
      • Raider
      • *****
      • *
      • *
      • Join Date: Sep 2009
      • Posts: 2018
      • Referrals: 1
      Re: Onboard diagnostic
      « Reply #10 on: Jul 23, 2010, 08:04:19 am »
       Again I have learned something here again.Thanks
      The happiest people don't necessarily have the best of everything. They just make the best of everything!
      At the end its not the years in your Life that count, Its the Life in your years!

      dreadly

      • living the dream
      • Global Moderator
      • Raider
      • *****
      • *
      • *
      • Join Date: Aug 2009
      • Posts: 15051
      • Referrals: 1
      Re: Onboard diagnostic
      « Reply #11 on: Jul 23, 2010, 08:50:08 am »
      Too cool, Does anyone have a legend breaking down what each number means?

      I was going to cut and paste, but didn't work well. If you have the service manual (for mine - the 08 version) page 7-34 has the codes listed.
      « Last Edit: Jul 23, 2010, 08:51:44 am by dreadly »

      rollinje

      • Guest
      Re: Onboard diagnostic
      « Reply #12 on: Jul 23, 2010, 09:39:58 am »
      ----------------------------

      1. Press and hold the Reset button
      2. Turn ignition to ON and keep holding the Reset until "diag" appears on the LCD (about 5 seconds).
      3. Now press and hold Reset and Select buttons at the same time and hold for about 5 seconds until you enter the diagnostics list.
      4. Now you can press Select to move up, or Reset to move back through all available code. Among them are throttle position sensor, temperature etc.

      01 : Throttle position - must be from 15-17 (closed) to 97-100 (opened)
      02 : Atmospheric pressure given in mmHg (normal is 760 - average weather)
      03 : Differential pressure between air and intake pipe
      05 : Air intake temperature (in Celcius)
      06 : Cooling liquid temperature (in Celcius)
      07 : Absolute speed (must be 000 in garage). Check with rear weel.
      08 : Lean angle safety switch control - must be from 0.4-1.4 (upright) to 3.8-4.2 (horizontal). DISMOUT THE SWITCH FOR CHECKING !!!
      09 : Battery voltage - must be above 12.0
      20 : Side stand switch - displays ON or OFF
      21 : Neutral gear switch - displays ON or OFF


      Part II : ECU memory check.


      60 : EEPROM error code presence - 00 means no default, 01 or 02 means default on corresponding cylinder (blinks if both cylinders).
      61 : Error Code memory log - Displays 00 if no error code in memory, displays the Error Code if any (11 to 50). Display changes every two seconds if more than one Error Code in memory, then start again from first.
      62 : Displays the number of Error Code in memory. To clear the memory, switch the Engine Run Switch to ON position (no backup).
      70 : Check Code number, display from 0 to 255


      Part III : Activators - To activate, turn Engine Run switch from OFF to ON - Engine check light is activated too.
      30 : Coil 1 is activated 5 times per second.
      31 : Coil 2 is activated 5 times per second.
      36 : Injector 1 solenoid is activated 5 times per second.
      37 : Injector 2 solenoid is activated 5 times per second.
      48 : Air duct solenoid is activated 5 times per second.
      49 : Air intake solenoid is activated 5 times per second.
      50 : Fuel injection relay is activated 5 times per second.
      51 : Cooler fan is activated every 5 seconds.
      52 : Headlight relay is activated every 5 seconds (2 seconds ON, 3 seconds OFF) - 2003+ model only.


      Error Codes
      Error Number 11 : Cylinder identification sensor error - DIAG mode (none)
      Error Number 12 : Crankshaft posiiton sensor error - DIAG mode (none)
      Error Number 13 : Air intake pressure sensor error - DIAG mode 03
      Error Number 14 : Air intake duct error - DIAG mode 03
      Error Number 15 : Throttle position sensor error - DIAG mode 01
      Error Number 19 : Sidestand sensor error - DIAG mode 20
      Error Number 20 : Air pressure sensors error - DIAG mode (none)
      Error Number 21 : Coolant temperature sensor error - DIAG mode 06
      Error Number 22 : Air intake temperature sensor error - DIAG mode 05
      Error Number 23 : Ambient air pressure sensor error - DIAG mode 02
      Error Number 24 : O2 (lambda) sensor error - DIAG mode (none)
      Error Number 30 : The bike went down - DIAG mode 08
      Error Number 33 : Coil 1 open circuit - DIAG mode 30
      Error Number 34 : Coil 2 open circuit - DIAG mode 31
      Error Number 41 : Tilt sensor error - DIAG mode 08
      Error Number 42 : Speed sensor error / Neutral sensor in short-circuit - DIAG mode 07-21
      Error Number 43 : Battery voltage control error - DIAG mode (none)
      Error Number 44 : EEPROM read/write error - DIAG mode 60
      Error Number 50 : ECU memory error - DIAG mode (none)
      Error Er-1 : ECU link error
      Error Er-2 : ECU link error
      Error Er-3 : ECU link error
      Error Er-4 : ECU link error


      Following ERROR codes DO NOT allow engine to run :
      11-12-19-30-41-50 and Er-1 to Er-4


      Error code 11 allow engine to continue running only if fault appears after engine start.


      Following ERROR codes DO allow engine to run but need immediate check because default values are taken by the ECU: 13-14-20-21-22-23-24-24-42-43-44



      ---------------------------------

      fake

      • Guest
      Re: Onboard diagnostic
      « Reply #13 on: Jul 23, 2010, 09:46:48 am »
      I didn't see where you listed the engine temp, which is either 10 or 11. (can't remember)

      JeffD62

      • Guest
      Re: Onboard diagnostic
      « Reply #14 on: Aug 22, 2010, 08:17:18 pm »
      Wat is code 18? and how do u turn off service engine light?